Date	Event type	Description
04/09/25 07:58:23	Boot	Trigger = TIMER
04/09/25 07:58:23	Boot	Reason = Dawn
04/09/25 07:58:23	Boot	Firmware = BuzzCopper 0.3.3v
04/09/25 07:58:23	Boot	DeviceId = deviceCCBA97162DEC,Nickname = FieldTest10
04/09/25 07:58:23	Boot	RunMode = Normal
04/09/25 07:58:23	Settings	Read from NVS
04/09/25 07:58:24	SD	Card is working
04/09/25 07:58:24	Time	Dusk = 17:56 for sun elevation 15 degrees
04/09/25 07:58:24	Time	Dawn = 07:58 for sun elevation 15 degrees
04/09/25 07:58:26	QRCode	Starting scan task
04/09/25 07:58:32	WiFi	? SSID: Crayden-Guest,Signal Strength: -71db,Channel: 11
04/09/25 07:58:32	WiFi	* SSID: Hotspot123,Signal Strength: -71db,Channel: 11
04/09/25 07:58:35	WiFi	Connection test Google (x1) OTA (x1) : OK
04/09/25 07:58:36	WiFi	Connected to Hotspot123 (-71db) IP = 192.168.1.198,GW = 192.168.1.254,WAN = 86.182.118.33
04/09/25 07:58:36	Battery level	3.56
04/09/25 07:58:36	RAM	Heap: 172424/311776 PSRAM: 7884015/8385719
04/09/25 07:58:36	Trigger	CONNECTED_TO_AP
04/09/25 07:58:36	QRCode	Stopping scan task
04/09/25 07:42:59	Time	NTP sync
04/09/25 07:42:59	Time	Drift = 942 secs in 1399 mins
04/09/25 07:43:06	OTA	Checking for update
04/09/25 07:43:08	OTA	No updates for this device
04/09/25 07:43:08	Trigger	TIME_SYNCED
04/09/25 07:43:09	Time	Dusk = 17:56 for sun elevation 15 degrees
04/09/25 07:43:09	Time	Dawn = 07:58 for sun elevation 15 degrees
04/09/25 07:43:09	Job queued	Job 1 queue 2 - send email (BuzzCopper startup)
04/09/25 07:43:09	Job queued	Job 2 queue 0 - save event log (/2025-09-04/eventLog.txt)
04/09/25 07:43:09	Job queued	Job 3 queue 1 - upload log (/2025-09-04/eventLog.json)
04/09/25 07:43:09	Time	Drift was 942 secs - no nap required
04/09/25 07:43:11	Job queued	Job 4 queue 2 - scan for uploads
04/09/25 07:43:14	Job complete	Job 1 in 5116 ms
04/09/25 07:43:14	Trigger	BOOT_EMAIL_SENT
04/09/25 07:43:17	Log	Last update